Sinus-wave inverter is actually a machine that distinguishes the output of the square wave from the output of the sine wave. It is an efficient machine. Generally, the use of the sine wave inverter is relatively easy. As long as you understand the relevant content, what are the characteristics of the sine wave inverter? How to use it and how to install the sine wave inverter, Xiaobian will show you.
sine wave inverter
Application method of sine wave inverter
1) Power selection
The power must be supplied by the battery or car cigarette lighter. 12V, 24V and 48V can be selected according to different commodities.
UPS power supply (Uninterrupted Power Supply) is a power supply equipment that supplies power to important loads without being disturbed by the power grid, stabilized voltage and stabilized frequency. After the mains power is off, UPS can continuously supply power to the load for a period of time to ensure the normal operation and operation of the load. This series of UPS uses high-frequency double-conversion structure with output barrier transformer and advanced full-digital control skills, with stable and clean output Uninterruptedly, it has complete network management function. Generally, UPS power supply has 1000w-20000w standard.
2) Connect inverter to power supply
Turn off the inverter and the device to "OFF" status
A: Battery power supply: connect the negative pole of the battery to the black terminal (-) of the inverter, and connect the positive pole of the battery to the red terminal (+) of the inverter.
B: Power supply for car cigarette lighter: the special wiring of cigarette lighter is connected to the red terminal of the inverter according to the red line, and the black line is connected to the black terminal of the inverter. After that, plug the plug of cigarette lighter into the car cigarette lighter.
3) Connect the inverter to the consumer
Ensure that the load power supply is the nominal power supply of the inverter, and the starting current cannot exceed the peak capacity of the inverter. After connecting the inverter and electrical appliances, turn on the inverter and electrical appliances.
Commercial performance of sine wave inverter
Pure sine wave output, suitable for TV, refrigerator, induction cooker and electric fan.
Microwave ovens, air conditioners and other household equipment use # microcomputer (CPU) control skills, with superior performance.
Ultra-wide input voltage scale, high-precision output, full-automatic voltage stabilization.
Built-in overload, short circuit, overvoltage, undervoltage, over-temperature and other maintenance functions, high reliability.
Simple and clear LED display can be upgraded to all digital LCD display, facilitating the observation of machine conditions.
The power supply time can be equipped arbitrarily according to different requirements.
Select valve-controlled maintenance-free lead-acid battery, intelligent battery handling, overcharge and over-discharge maintenance, and extend battery service life.
Installation method of sine wave inverter
1) Open the packing box and check whether the accessories are complete (a communication input line and a manual);
2) Select a ventilated and clean device environment;
3) Acknowledge that the output voltage of the DC power supply and/or the voltage of the storage battery are consistent with the DC input voltage required by the inverter;
4) Acknowledging the positive and negative polarity of the power supply, the high potential is positive, and the low potential is negative;
5) Connect the positive pole to the positive terminal of the inverter (marked with "+") and the negative pole to the negative terminal (marked with "-"). Ensure reliable connection;
6) Take out the AC input cable from the accessory bag, insert one end into the socket marked "AC IN" on the chassis, and insert the other end into the mains socket;
7) Connect the load input line to the output socket of the inverter (marked with "AC OUT").
After the introduction of the editor, do you know the sine wave inverter? Later, I would like to tell you that the purchase of sine wave inverters is important. Those with anti-counterfeit signs and environmental protection signs must be purchased at regular places, otherwise poor quality products can easily cause accidents.
正弦波逆变器其实就是将方波的输出和正弦波输出做出区别来的，是效率提高的机器，一般正弦波逆变器的使用比较容易，只要了解相关内容即可，那么正弦波逆变器都有哪些特点呢？使用方法又是如何的以及正弦波逆变器的安装方法是什么，小编将带您了解下。
正弦波逆变器的运用方法
1）电源挑选
必须由蓄电池或许轿车点烟器供给电源。依据商品的不一样可挑选12V、24V、48V。
UPS电源(Uninterrupted Power Supply不间断电源）是为重要负载供给不受电网搅扰、稳压、稳频的电力供应的电源设备，在市电掉电后，UPS可给负载持续供给一段时刻供电，保证负载正常运转运用，此系列UPS选用带输出阻隔变压器的高频双改换构造和领先的全数字操控技能，输出安稳、洁净、不间断具备完备的网络办理功用 ，通常UPS电源有1000w-20000w标准。
2）衔接逆变器到电源
关掉逆变器和装置的开关于“OFF”状况
A: 电池供电：把电池的负极衔接到逆变器的黑色接端子（-），电池的正极衔接到逆变器的赤色接线端子（+）。
B：轿车点烟器供电：点烟器的专用连线按照红线对逆变器红端子，黑线对逆变器黑端子衔接好后，把点烟器的插头插到轿车点烟器即可。
3）衔接逆变器到用电器
保证负载电源是逆变器的标称电源，而且发动电流不能超过逆变器的峰值容量。衔接完逆变器和用电电器后， 翻开逆变器和用电器。
正弦波逆变器的商品性能
纯正弦波输出，适用于电视机、电冰箱、电磁炉、电风扇。
微波炉、空调等家用设备运用# 微电脑（CPU）操控技能，性能优越。
超宽输入电压规模、高精度输出、全自动稳压。
内置过载、短路、过压、欠压、过温等维护功用，可靠性高。
简洁明了的 LED显现，可升级到全部的数字化 LCD 显现，便利观察机器状况。
供电时刻可依据不一样要求任意装备。
选用阀控式免维护铅酸电池，智能型电池办理，过充，过放电维护，延伸电池运用寿命。
正弦波逆变器的装置方法
1）翻开包装箱，检查附件是不是完备（一条沟通输入线和一本说明书）；
2）挑选通风、清洗的装置环境；
3）承认直流电源输出电压和(或)蓄电池的电压与逆变器要求的直流输入电压相符合；
4）承认电源的正负极性，高电位为正，低电位为负；
5）将正极接到逆变器的正极接线柱上（标有“+”），负极接到负极接线柱上(标有 “-”）。保证衔接可靠；
6）从附件袋中取出交输入线，将其间的一端刺进机箱上标有“AC IN”的插座中，将另一端刺进市电插座中；
7）将负载输入线衔接在逆变器的输出插座（标有“AC OUT”）上。
经过小编的一番介绍，您是否清楚正弦波逆变器了呢？后小编要告诉各位，正弦波逆变器的购买上要主要，需要购买有防伪标识和环保标志的，一定要到正规地点购买，不然劣质产品很容易引发事故。